NYC Building Maintenance Checklist: 40 HPD Compliance Checks (PDF,2026)

(No reviews yet) Write a Review
SKU:
NYC Building Maintenance Checklist: 40 HPD Compliance Checks
MPN:
NYC Building Maintenance Checklist
  • NYC Building Maintenance Checklist: 40 HPD Compliance Checks (PDF,2026)
  • NYC Building Maintenance Checklist: 40 HPD Compliance Checks (PDF,2026)
  • NYC Building Maintenance Checklist: 40 HPD Compliance Checks (PDF,2026)
$0.00
Frequently bought together:

Description

NYC BUILDING OWNER MAINTENANCE CHECKLIST — 40 PRIORITY ITEMS

Based on NYC HPD guidance and common housing-maintenance complaint and violation categories, checked November 15, 2026. This is a practical inspection checklist, not a statistical ranking of the most-issued violations.

It is intended primarily for residential rental buildings. Requirements vary by building age, number of apartments, occupancy, and equipment. Some fire-safety conditions also fall under DOB or FDNY jurisdiction.

Building address: ______________________________
Inspection date: __________ Inspected by: __________________
For each defect, record: apartment/location, photograph, repair assigned to, target date, and completion date.

HEAT, HOT WATER, AND PLUMBING

☐ 1. Required daytime heat
During October 1–May 31, check representative apartments, especially top-floor, corner, and previously cold units. Between 6 AM and 10 PM, indoor temperature must be at least 68°F when the outdoor temperature is below 55°F.

☐ 2. Required nighttime heat
During heat season, verify at least 62°F indoors between 10 PM and 6 AM, regardless of outdoor temperature. Investigate overnight shutdowns or thermostat settings that cause temperatures to drop.

☐ 3. Hot-water temperature and availability
Test apartment fixtures, including those farthest from the water heater. Hot water must be available year-round at a constant minimum 120°F. Investigate inconsistent supply, long outages, and temperature fluctuations. HPD

☐ 4. Boiler, heating equipment, and access
Check for leaks, unusual noises, failed controls, and recurring shutdowns. Arrange qualified servicing before heat season. Keep access available to heating equipment and verify the required boiler-room access notice.

☐ 5. Water supply and pressure
Run hot and cold water at sinks, showers, and tubs. Investigate weak flow, interrupted supply, and fixtures that cannot be used normally.

☐ 6. Leaking pipes and fixtures
Inspect underneath sinks, around toilets, behind accessible plumbing, and along basement piping. Repair active leaks and damaged connections.

☐ 7. Toilets, sinks, tubs, and drains
Confirm toilets flush properly and fixtures drain without backups. Repair loose toilets, broken fixtures, persistent clogs, and sewage leaks. These are practical checks supporting the owner’s duty to maintain safe apartment conditions. HPD

FIRE SAFETY, DOORS, AND SECURITY

☐ 8. Apartment entrance doors self-close and latch
Open and release each accessible apartment entrance door. Confirm it closes completely and latches without being pushed. Check closers, hinges, alignment, and binding against flooring.

☐ 9. Common-area doors self-close where required
Test stairway, corridor, and other required self-closing doors. Remove wedges and other devices holding them open. Record repairs and retest after adjustment. HPD can proactively inspect these doors. HPD

☐ 10. Smoke alarms
Confirm required approved alarms are installed and operational. Check for missing devices, damage, and expired replacement dates; verify placement against applicable requirements and manufacturer instructions.

☐ 11. Carbon monoxide alarms
Check required CO alarms for operation, placement, and end-of-life expiration. Keep installation and replacement records.

☐ 12. Natural gas detector readiness
For buildings with gas piping, determine applicability and plan installation and required notices. HPD currently lists January 1, 2027 as the compliance date, subject to possible further extension. Recheck the official requirement before that date. HPD

☐ 13. Unobstructed escape routes
Walk every hallway, stairway, and exit route. Remove stored furniture, bicycles, garbage, and other obstructions. Confirm exit doors can be used safely.

☐ 14. Fire escapes
Check visually for blocked access, stored items, loose components, severe corrosion, and damaged platforms or ladders. Refer suspected defects to a qualified contractor.

☐ 15. Building entrance security
Check entrance doors, frames, locks, and required security equipment. Confirm doors secure properly without creating an exit hazard.

☐ 16. Doorbells, buzzers, and intercoms
Test apartment call buttons and required intercom functions. Repair failed communication or entry-release equipment. HPD identifies broken doors, locks, buzzers, and intercoms among maintenance complaint categories. portal.311.nyc.gov

WATER INTRUSION, MOLD, AND PESTS

☐ 17. Roof and exterior water entry
Look for recurring ceiling stains, wet walls, and leaks after rain. Arrange inspection of roofing, flashing, exterior joints, and drainage where symptoms indicate water entry.

☐ 18. Mold and dampness
Inspect bathrooms, kitchens, closets, exterior walls, and areas behind known leaks. Correct the moisture source and use appropriate remediation practices; painting over mold does not resolve the underlying condition.

☐ 19. Mice and rats
Look for droppings, gnaw marks, burrows, and openings around pipes or doors. Address entry points, food sources, and infestations.

☐ 20. Cockroaches and other pest activity
Inspect kitchens, bathrooms, refuse areas, and plumbing penetrations. Use integrated pest management, including sealing openings, cleaning, leak repair, and appropriate treatment.

☐ 21. Annual indoor-allergen inspection
For buildings with three or more apartments, document required annual inspections for mold and pests. Respond to complaints between annual inspections and provide required lease notices and educational material. HPD

☐ 22. Bedbug complaints and treatment follow-up
Investigate reports promptly. Arrange appropriate treatment and follow-up, and document affected apartments, treatment dates, and recurrence.

☐ 23. Bedbug annual report and tenant information
Collect infestation history, complete the required annual filing, and post or distribute the filing receipt and required prevention information as applicable. HPD

LEAD PAINT, WINDOWS, AND INTERIOR CONDITIONS

☐ 24. Peeling paint and possible lead hazards
Inspect deteriorated painted surfaces, particularly windows, doors, and friction surfaces. In covered buildings, investigate and correct lead hazards using required safe work practices and appropriately qualified workers.

☐ 25. Annual lead notice and investigation
Where applicable, obtain annual information about children under six, including children who routinely spend at least 10 hours weekly in the apartment. Complete required investigations and retain documentation. nyc.gov

☐ 26. Required lead-paint XRF testing
Check that covered apartments and common areas have the required independent certified lead-paint testing reports. HPD states the general testing deadline was August 9, 2025; missing required testing needs attention now. nyc.gov

☐ 27. Window guards
In covered buildings, verify approved guards are properly installed where children 10 or younger reside and where tenants request them. Check required common-area windows. Respect exceptions for fire-escape windows and required secondary exits.

☐ 28. Annual window-guard notices
Send required annual notices, track responses, and follow up when information is missing. Check that guards have not been removed or loosened for air-conditioner installation. HPD

☐ 29. Window condition
Check broken glass, damaged frames, failed locks, and windows that will not operate safely. Investigate water penetration and deteriorated surrounding surfaces.

☐ 30. Walls, ceilings, and floors
Inspect for loose plaster, sagging ceilings, holes, unstable flooring, and trip hazards. Investigate the cause before making cosmetic repairs.

☐ 31. Interior painting
Track apartment painting dates. In multiple dwellings, occupied apartments generally must be painted every three years; address deteriorated conditions when needed rather than waiting for the cycle. portal.311.nyc.gov

COMMON AREAS, SANITATION, AND EQUIPMENT

☐ 32. Hallway, stairway, and entrance lighting
Check fixtures, bulbs, switches, and timers during daylight and after dark. Repair outages and investigate areas that remain inadequately lit. HPD

☐ 33. Cleanliness and garbage storage
Inspect halls, stairs, basement, yard, and refuse areas. Remove accumulations, clean spills, and address conditions attracting pests. Check that garbage instructions are posted where required. HPD

☐ 34. Stove knob covers and safety devices
For covered gas stoves, provide compatible required knob covers or qualifying locking devices where a child under six resides, or upon tenant request. Track annual notices and written refusals. nyc.gov

NOTICES, RECORDS, AND VIOLATION FOLLOW-UP

☐ 35. Superintendent and emergency contact information
Verify applicable postings show accurate names, telephone numbers, and contact information. Replace missing or illegible notices.

☐ 36. Required permanent signs
Audit applicable HPD postings, including the registration number, ABCs of Housing notice, detector notices, suspected gas-leak instructions, garbage notice, and boiler-room access information. Confirm wording, location, and format against HPD requirements.

☐ 37. Conditional notices and inspection records
Check applicable service-interruption notices, disaster-response information, and required inspection record arrangements. Update notices when circumstances change. A generic sign package may not cover a particular building’s requirements. HPD

☐ 38. Annual HPD property registration
Confirm required registration is current and owner/managing-agent information is accurate. The annual deadline is September 1. Registration generally applies to buildings with three or more residential units and non-owner/family-occupied one- and two-family homes. HPD

☐ 39. Open HPD violations and correction deadlines
Review HPD records regularly. Assign each violation to a responsible person, track its specific correction and certification deadlines, and retain photographs and contractor documentation. Completing a repair does not automatically clear the violation from HPD’s records. HPD

☐ 40. Complaint and repair log
Record tenant complaints, access arrangements, inspection findings, repair work, and follow-up verification. Look for repeated leaks, recurring pests, and repeated service failures that indicate an unresolved underlying problem. HPD

Suggested inspection routine: Walk common areas daily or weekly according to building needs; conduct a documented monthly maintenance review; inspect after major storms and reported leaks; service heating equipment before heat season; and maintain a separate calendar for annual inspections, notices, and filings. These are recommended operating intervals—specific legal deadlines still control.

Priority rule: Address immediate safety hazards and essential-service failures promptly. Do not wait for the next scheduled inspection or an HPD violation.

 

 

This article is provided by HPD Signs NYC for general educational and informational purposes only. It does not constitute legal advice or establish an attorney-client relationship. Housing laws, exemptions, rent thresholds, and notice requirements may change. Property owners and managers are responsible for determining which laws apply to their buildings and for consulting qualified legal professionals when necessary.

HPD Signs NYC is an independent signage supplier and is not affiliated with the New York State Attorney General, NYC HPD, or any government agency.

 

LEGAL DISCLAIMER, LIMITATION OF LIABILITY, AND TERMS OF USE

INDEPENDENT SMALL FAMILY-OWNED BUSINESS NOTICE

We are an independent privately owned small family-owned business operating in the United States.

We are NOT the City of New York, HPD, DOB, FDNY, DSNY, DEP, DOT, DHCR, HUD, OSHA, EPA, FEMA, any state agency, any federal agency, or any governmental, quasi-governmental, regulatory, enforcement, housing, building, fire, transportation, sanitation, environmental, health, public safety, or public authority organization.

We are not affiliated with, endorsed by, approved by, sponsored by, authorized by, certified by, partnered with, or connected in any manner with any governmental agency or authority.

Any references to governmental agencies, laws, regulations, codes, standards, ordinances, inspections, notices, permits, requirements, compliance programs, enforcement actions, or public resources are provided solely for informational and descriptive purposes and do not imply endorsement, approval, certification, sponsorship, authorization, partnership, or affiliation.

Many governmental publications, flyers, brochures, forms, notices, checklists, and educational materials referenced, reproduced, summarized, attached, linked, or distributed by our company are publicly available documents that may be obtained directly from the applicable government agency, often at no charge.

INFORMATIONAL PURPOSES ONLY

All content, products, services, signs, sign packages, notices, brochures, flyers, downloadable files, PDF documents, checklists, product descriptions, blog articles, compliance guides, customer communications, emails, specifications, marketing materials, and related information are provided solely for general informational and educational purposes.

Information may become outdated, amended, revised, superseded, interpreted differently, or withdrawn without notice.

Laws, regulations, building codes, fire codes, housing requirements, inspection procedures, accessibility requirements, environmental regulations, insurance requirements, safety standards, and governmental policies frequently change and may vary by jurisdiction, occupancy type, building classification, property use, location, agency interpretation, and individual circumstances.

We make no representation, warranty, or guarantee that any information provided is accurate, complete, current, reliable, applicable, legally sufficient, or appropriate for any specific situation.

Users assume all risk associated with reliance upon any information provided.

NO PROFESSIONAL ADVICE

Nothing provided by our company shall be construed as:

• Legal advice
• Engineering advice
• Architectural advice
• Fire protection advice
• Life safety advice
• Accessibility advice
• ADA compliance advice
• Building code advice
• Fire code advice
• Housing code advice
• Inspection advice
• Regulatory advice
• Tax advice
• Insurance advice
• Real estate advice
• Environmental advice
• Construction advice
• Property management advice
• Professional consulting services of any kind

No attorney-client, consultant-client, architect-client, engineer-client, contractor-client, professional-client, or fiduciary relationship is created through the use of our website, purchase of products, receipt of materials, or communication with our company.

Customers should consult qualified attorneys, architects, engineers, code consultants, licensed contractors, fire protection professionals, insurance professionals, accountants, and applicable governmental authorities regarding their specific circumstances.

GOVERNMENT PUBLICATION DISCLAIMER

Any government-related document, brochure, flyer, checklist, guide, notice, publication, form, or educational material distributed by our company is provided solely as a convenience to customers.

Such materials remain the property of their respective agencies and organizations.

Our company does not create, maintain, update, approve, certify, validate, or control the contents of such governmental publications.

Government agencies may revise, amend, replace, withdraw, reinterpret, or update such materials at any time without notice.

Customers should always consult the original official governmental source for the most current information.

Official government publications, agency guidance, statutes, regulations, rules, code provisions, interpretations, and enforcement positions shall always control over any summary, reproduction, attachment, description, reference, or explanation provided by our company.

CUSTOMER RESPONSIBILITY FOR COMPLIANCE

The customer, property owner, landlord, management company, architect, engineer, contractor, installer, purchaser, building owner, consultant, and end user bear sole and exclusive responsibility for determining:

• Whether signage is required
• What signage is required
• Applicable laws and regulations
• Sign wording and content
• Sign dimensions and specifications
• Material requirements
• Installation requirements
• Placement requirements
• Inspection requirements
• Permit requirements
• Accessibility requirements
• Fire safety requirements
• Building safety requirements
• Environmental requirements
• Insurance requirements
• Operational requirements

Purchasing any sign, sign package, decal, placard, marker, notice, template, guide, checklist, flyer, brochure, or informational material from us does not constitute compliance with any law, code, regulation, ordinance, permit, inspection requirement, insurance requirement, governmental directive, court order, or regulatory obligation.

SIGNAGE DISCLAIMER

All signs, labels, notices, placards, decals, markers, plates, directories, room identification signs, building signs, compliance signs, and related products are provided solely as physical products.

We do not certify, guarantee, warrant, represent, or promise that any product:

• Meets any legal requirement
• Meets any code requirement
• Passes any inspection
• Satisfies any governmental requirement
• Creates legal compliance
• Creates regulatory compliance
• Meets insurance requirements
• Meets accessibility requirements
• Meets ADA requirements
• Meets OSHA requirements
• Meets FDNY requirements
• Meets HPD requirements
• Meets DOB requirements
• Prevents injury or property damage
• Eliminates legal obligations
• Eliminates regulatory obligations

The purchaser is solely responsible for determining suitability for the intended application.

INSTALLATION DISCLAIMER

Improper installation may create safety hazards, accessibility issues, regulatory violations, inspection failures, property damage, personal injury, or death.

We assume no responsibility whatsoever for:

• Installation methods
• Installation locations
• Placement decisions
• Fasteners selected
• Adhesive selection
• Structural attachment methods
• Mounting surfaces
• Electrical connections
• Maintenance practices
• Visibility requirements
• Accessibility requirements
• Inspection outcomes

All installation decisions remain the sole responsibility of the purchaser, installer, contractor, property owner, and building owner.

DISCLAIMER OF WARRANTIES

TO THE MAXIMUM EXTENT PERMITTED BY LAW, ALL PRODUCTS, SERVICES, INFORMATION, DOCUMENTS, DOWNLOADS, PUBLICATIONS, COMMUNICATIONS, AND MATERIALS ARE PROVIDED "AS IS," "WITH ALL FAULTS," AND "AS AVAILABLE."

WE EXPRESSLY DISCLAIM ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING WITHOUT LIMITATION:

• MERCHANTABILITY
• FITNESS FOR A PARTICULAR PURPOSE
• NON-INFRINGEMENT
• ACCURACY
• COMPLETENESS
• RELIABILITY
• PERFORMANCE
• DURABILITY
• CODE COMPLIANCE
• REGULATORY COMPLIANCE
• INSPECTION APPROVAL

NO ORAL OR WRITTEN STATEMENT SHALL CREATE ANY WARRANTY NOT EXPRESSLY SET FORTH IN A WRITTEN AGREEMENT SIGNED BY AN AUTHORIZED REPRESENTATIVE OF OUR COMPANY.

LIMITATION OF LIABILITY

TO THE MAXIMUM EXTENT PERMITTED BY LAW, OUR COMPANY, ITS OWNERS, FAMILY MEMBERS, EMPLOYEES, OFFICERS, DIRECTORS, AGENTS, REPRESENTATIVES, CONTRACTORS, SUCCESSORS, ASSIGNS, SUPPLIERS, DISTRIBUTORS, AFFILIATES, AND SERVICE PROVIDERS SHALL NOT BE LIABLE FOR ANY:

• Direct damages
• Indirect damages
• Consequential damages
• Incidental damages
• Special damages
• Punitive damages
• Exemplary damages
• Lost profits
• Lost revenue
• Lost business opportunities
• Business interruption damages
• Loss of use
• Loss of data
• Property damage
• Personal injury
• Bodily injury
• Death
• Government fines
• Civil penalties
• Violations
• Citations
• Inspection failures
• Enforcement actions
• Attorney fees
• Litigation expenses
• Regulatory actions

WHETHER ARISING FROM CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, PRODUCT LIABILITY, WARRANTY, STATUTE, EQUITY, OR ANY OTHER LEGAL THEORY.

MAXIMUM LIABILITY CAP

IN ALL CIRCUMSTANCES, THE MAXIMUM AGGREGATE LIABILITY OF OUR COMPANY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE SPECIFIC PRODUCT THAT GAVE RISE TO THE CLAIM.

INDEMNIFICATION

The customer agrees to defend, indemnify, and hold harmless our company, its owners, family members, officers, employees, contractors, affiliates, successors, and assigns from and against any and all claims, demands, damages, losses, liabilities, penalties, fines, judgments, settlements, costs, expenses, and attorney fees arising from:

• Product use
• Product misuse
• Product installation
• Product modification
• Regulatory non-compliance
• Inspection failures
• Customer-provided content
• Customer instructions
• Property conditions
• Building conditions
• Third-party claims

THIRD-PARTY LINKS AND EXTERNAL RESOURCES

Any hyperlinks or references to government agencies, websites, laws, regulations, standards, organizations, publications, or third-party resources are provided solely as a convenience.

We do not control, endorse, verify, guarantee, maintain, or assume responsibility for third-party content and shall not be liable for any reliance placed upon such content.

GOVERNING LAW AND VENUE

This Legal Disclaimer, Limitation of Liability, and Terms of Use shall be governed by and construed under the laws of the State of New York, without regard to conflict-of-law principles.

Any dispute, claim, or legal proceeding shall be brought exclusively in the state or federal courts located within the State of New York.

ACCEPTANCE OF TERMS

By accessing our website, downloading materials, receiving information, purchasing products, requesting services, viewing content, or using any product, document, publication, flyer, guide, brochure, checklist, sign, or informational material provided by our company, the user acknowledges that they have read, understood, and agreed to be bound by this Legal Disclaimer, Limitation of Liability, and Terms of Use.

View AllClose