WET STANDPIPE SIGN ( ALUMINIUM 2X7 )

(No reviews yet) Write a Review
SKU:
B01MS5C866
UPC:
602927405847
Availability:
USUALLY SHIP WITH IN 1-2 BUSINESS DAY
  • WET STANDPIPE
  • WET STANDPIPE Sign
  • WET STANDPIPE SIGNAGE
  • SIGN WET STANDPIPE
  • FIRE DEPT SIGNAGE WET STANDPIPE
  • FIRE DEPT SIGN
$7.97
Frequently bought together:

Description

WET STANDPIPE SIGN

Size: 2 x 7 inch

Sign has hole for hanging and heavy duty installation

Sign Thickness:0.02"

Sign Materials: Aluminum

Sign background color:White

The "Wet Standpipe" sign holds paramount importance in ensuring fire safety and effective emergency response within a building. By clearly indicating the presence of a wet standpipe system, this sign informs occupants and emergency responders of the available fire suppression method. Wet standpipe systems are crucial components of fire protection infrastructure, providing readily available water sources for firefighting operations on various floors of a building. Therefore, the presence of this sign not only serves as a proactive measure in promoting fire safety awareness but also aids in efficient emergency response by directing individuals to the appropriate fire suppression equipment. In essence, the "Wet Standpipe" sign plays a crucial role in safeguarding against fire hazards and ensuring the protection of occupants and assets within the building.

 

Shipping and Handling Cost:

Our Shipping is fixed whether you buy 1 item or 20 item (We ship within USA only) do not miss this opportunity to buy all sign needed at no additional shipping cost.

 

Sales Tax:

We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.

 

Notice:

The requirement for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of sign. We makes no warranty or representation of suitability of sign for any specific application. It IS THE CUSTOMER'RESPONSIBILITY TO ENSURE THAT THE SIGHS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL,LOCAL AND MUNICIPAL LAWS. Please review term and conditions prior to purchase. For more information about what is required, see the laws that are referenced and the rules applicable to your city and stare. Thsi page is for informational purposes only and is not intended a legal advice, professional advice or a statement of law.You may wish to consult with a attorney.

 

DISCLAIMER to comply with the New York City Consumer Protection Law which applies to all businesses operating in New York City. HPD-signs.com is small family operated Brooklyn-based business. HPD-signs.com is not a City of New York store nor are the website, products or services affiliated with the City of New York City or any agency of the City of New York. HPD-signs.com itself, its business,website, products.services or any hyperlinks from its website are not sponsored by, approved by, affiliated with, endorses by, or connected to the City of New York or any agency of the City of New York. including

 

Wet standpipe signs are designed to inform the fire department and maintainace teams of the type of fire sprinkler in the building. Wet Standpipe systems are wet at all times; Simple as efficient

 

A "wet" standpipe is filled with water and is pressurized at all times. In contrast to dry standpipe systems, which can be used only by firefighters, wet standpipes can be used by building occupants as well. Usually wet standpipes feature hoses, that allow building occupants to launch quick fire attacks.

 

Automatic wet standpipe system pipes have pressurized water at all times. When a hose outlet is opened, water immediately flows from them; Hence, the word “automatic”; Hence, their full not- complete reliance on firefighters supplying water and pressure to the system; Hence, their level of efficiency.

 

What is the purpose of a standpipe?

Standpipe systems present a series of pipes, which connect a water supply to hose connections; As extension of the fire hydrant system. They are designed to provide a pre-piped water system for building occupants or the fire department

 

There are two main categories of standpipes

1)     Wet

2)     Dry.

 

Wet systems are either automatic wet or manual wet. Automatic wet systems keep water in the standpipe system at all times and have a fire pump capable of providing the needed pressures. Manual wet systems keep water in the system at all times, but are not backed up by a pump. A combination of a manual wet standpipe and a sprinkler system may allow for sufficient pressure sprinkler supply without the use of a pump; Such a system however, may in fact need a relatively small pump to supply sprinklers properly; But will not adequately supply hose outlets.

 

The fire department crew would have to supply the fire department connection (FDC) enough to ensure the needed level of pressure on its attack lines. Automatic systems are the most commonly found systems in high-rise buildings, but it is up to each department to perform pre-incident planning and building inspections to identify any abnormal systems. Automatic and semi-automatic dry systems keep air in the standpipe. Automatic systems keep air under pressure. If the standpipe outlet valve is opened, it opens a valve allowing water to fill the system. Semi-automatic systems present unpressurized air. Water is introduced via a dry pipe valve that must be activated manually. The two dry systems above have a permanent water supply. The manual dry system presents unpressurized air in the system and has no fire pump or water supply; Hence, in such a case it is mandatory for the FDC to be used before the launch of an efficient fire attack.
 
View AllClose

Warranty Information

All products are warrantied by HPDSIGNS.NYC to be free of defects in material or workmanship, at the time of shipment. HPDSIGNS.NYC liability shall be limited to replacement of the product, if it can be determined that the product was defective at the time of shipment. Defective products, subject to the inspection by HPDSIGNS.NYC, will be replaced or repaired on a no charge basis. Damage caused by, accidents, or improper use, is the responsibility of the Buyer. HPDSIGNS.NYC is not responsible for misuse of the products, or if the Buyer is unable to use the product. This warranty is in lieu of any other warranty expressed or implied. All shipping costs related to returning the product to the Manufacturer for inspection will be prepaid by the buyer. Shipping costs will be reimbursed if parts are determined to be defective. Shipping non-defective parts back to the Buyer will be paid by the Buyer. All expenses, losses in revenue, and labor charges arising or originating from the failure of defective parts will be borne by the Buyer. The requirements for sign content are determined by intended use and by applicable regulation. BUYER is responsible for determining the appropriate content for a sign. HPDSIGNS.NYC makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. The Warranty excludes natural aging of the unit, discoloration, ordinary wear and tear, ordinary weathering, sunlight fading, or rust. It excludes staining caused by mold, mildew or tree sap and damage caused by animals including insects, vermin or household pets. The warranty does not cover damage caused by Acts of Nature including but not limited to: wind in excess of 65 mph; tornado; hurricane; microburst; hail; flood; blizzard; extreme heat; pollution or fire events. The following actions void the warranty: improper assembly; use above intended and reasonable capacity; misuse; abuse; modification; cleaning with abrasive tools, exposing the unit to heat sources and vandalism. Painting, sandblasting, cleaning with harsh chemicals not recommended voids the warranty . Modification of the original product voids all warranties. HPDSIGNS.NYC assumes no liability for any modified product .HPDSIGNS.NYC is not responsible for: loss of use of the unit; labor for repair; inspection fees or disposal costs. THIS WARRANTY IS NONTRANSFERABLE. IT IS VALID FOR 90 DAYS FROM PURCHASE DATE. THE WARRANTY IS VOIDED AFTER 90 DAYS. HPDSIGNS.NYC AND BUILDINGSIGNS.COM HEREUNDER IS LIMITED SOLELY TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT OR PART AND IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM ANY DEFECT IN MATERIAL OR WORKMANSHIP OR FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.
View AllClose

Related Products

IN THIS SECTION IN THIS SECTION Sign
Add to Cart
Quick view

IN THIS SECTION SIGN ( ALUMINIUM 2X7 )

BUILDINGSIGNS.COM

$7.97
IN THIS SECTION SIGN Size: 2 x 7 Inch Sign has hole for hanging and heavy duty installation Sign Thickness:0.02" Sign background color:White The "In This Section" sign serves as a vital navigational...