Notice Gas Shut Off Valve Sign (Yellow, Aluminium 7x10-Rust Free)

Notice Gas Shut Off Valve Sign (Yellow, Aluminium 8.5X11-Rust Free)

Size: 8.5x11

Material: Aluminum

Backround color:Yellow

Gas safety signage- We provide all gas safety signage for you gas meter room. We carry all gas safety signage in stock and ready to ship. The gas safety signage for example “Gas Shut off valve” design to identify the location to turn off the gas system , furnace, boiler and many gas devices. The signs Emergency shut off gas design to identify the location of the valve that will turn off the machine in case of emergency.

What is Emergency gas valve for?

If a leak happens at a specific appliance, the valve allows you to turn off the natural gas at the appliance rather than shutting off all of your natural gas service. Some valves require a wrench to turn them.

What is a gas Shut of valve and it is location?

Houses with natural gas have a main shutoff valve located just before the gas meter. This valve, often called the street-side valve, is normally a rectangular nub (Photo 1). When the long side of the nub or handle is parallel to the incoming gas line, it’s open and the gas is flowing. When it’s turned a quarter turn, perpendicular to the incoming pipe, it’s closed.

How do you turn off emergency gas?

There is a shut-off valve located about 6"-8" above the ground. When the valve runs parallel to the pipe the gas is on, when it's set perpendicular to the pipe (like a plus sign) it is shut off. If you've determined your gas is on, turn the valve 90 degrees in either direction and it will shut off.

A gas shut off valve sign is a type of safety sign used in buildings to identify the location of gas shut off valves. Gas shut off valves are used to control the flow of gas to appliances and other gas-using equipment in the building. The purpose of a gas shut off valve sign is to provide clear and easy-to-read information to building occupants and emergency responders about the location of gas shut off valves.

The design of a gas shut off valve sign must meet specific standards and regulations set by governing bodies such as the American National Standards Institute (ANSI) and the International Building Code (IBC). The sign must be easily visible, with clear and legible text, and it must use symbols and graphics that are universally recognized. 

It is important for building occupants to be aware of the location of gas shut off valves in the event of a gas leak or other emergency situation. In such cases, turning off the gas supply can help to prevent fire, explosion, or other hazardous conditions. Building occupants should be familiar with the operation of gas shut off valves and should know how to turn off the gas supply in the event of an emergency.

In addition to being aware of the location of gas shut off valves, it is important to regularly inspect and maintain the valves to ensure they are in good working condition. This includes checking for signs of corrosion or damage, and testing the valves to ensure they can be easily turned on and off. If any problems are detected with the gas shut off valves, they should be repaired or replaced as soon as possible to ensure they are functioning correctly and to ensure the safety of building occupants and emergency responders. Regular maintenance of gas shut off valves is an important aspect of overall building safety and helps to ensure the safety of building occupants and emergency responders.

Shipping and Handling Cost:

Our Shipping is fixed whether you buy 1 item or 20 items (We ship within USA only) - do not miss this opportunity to buy all signs needed at no additional shipping cost.

Sales Tax:

We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.

DISCLAIMER to comply with the New York City Consumer Protection Law which applies to all businesses operating in New York City: HPD-signs.com is a small family-owned and family-operated Brooklyn-based business. HPD-signs.com is not a City of New York store nor are the website, products or services affiliated with the City of New York or any agency of the City of New York. HPD-signs.com itself, its business, website, products, services, or any hyperlinks from its website are not sponsored by, approved by, affiliated with, endorsed by, or connected to the City of New York or any agency of the City of New York, including but not limited to HPD, DOB, DOT, DSNY, FDNY directly or by implication.

The requirements for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of signs. We makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. Please review terms and conditions prior to purchase. 

The codes may not be the most recent version. The State / federal or other regulation department may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

For more information about what is required, see the laws that are referenced and the rules applicable to your city and state. This page is for informational purposes only and is not intended as legal advice, professional advice or a statement of law. You may wish to consult with an attorney.

We provide both signs required by city and state regulation and Property Management Signs , DOB Signs , Hallway Signs , HPD Signs , Fire Department Signs , Floor Identification Signs , Door Signs , Building Directional Signs , Floor Number Signs , Building Signs , Silver Signs, ADA signs and many more in stock and ready to ship.